Professional services
Acrylic nameplates and door/cabin signs for advocates, doctors, consultants, and clinics.
Print Branding
Acrylic Sign Boards
LED backlit and non-lit acrylic sign boards, 3D acrylic lettering, reception logo walls, and nameplates, laser-cut and assembled at our Mumbai facility, installed across India.
LED backlit acrylicIn-house laser cutting3D acrylic lettersReception & retailHealthcare & BFSI
Last updated: 30 May 2026
15+
Years operating
In-House
Laser & fabrication
Pan-India
Plus Gulf delivery
In Short
Acrylic sign boards are signage made from cast or extruded acrylic sheet, finished as LED backlit, edge-lit, or non-lit boards, 3D letters, or nameplates. Impulse Branding Solutions manufactures them in-house in Mumbai, laser cutting, LED assembly, and installation under one contract, for offices, retail, healthcare, and BFSI clients across India and the Gulf.
Acrylic is the workhorse material of modern signage: optically clean, easy to illuminate, and capable of a premium finish that printed flex cannot match. We use it for everything from a glowing reception logo wall to a doctor's nameplate. Because we cut, polish, assemble, and install every acrylic board in-house at our Mumbai facility, we control the edge quality, the colour match, the LED spread, and the mounting, the four things that separate a sharp acrylic sign from a cheap one. One contract covers design, fabrication, and pan-India installation.
What We Make
What types of acrylic sign boards does IBS manufacture?
"Acrylic sign board" covers a wide family of products, from a glowing backlit fascia to a slim interior nameplate. We manufacture the full range in-house, so a single engagement can mix illuminated and non-lit elements with a consistent finish and a single point of accountability.
Print Branding · Type 01
LED Backlit Acrylic Sign Boards
An acrylic face over an array of LED modules in a shallow box or frame, producing an even, glowing surface.
- Even illumination: calibrated LED module spacing and diffuser acrylic eliminate hot spots and dark patches across the face
- Face options: translucent acrylic with printed, vinyl-applied, or routed-and-backed graphics for crisp brand colour
- Best for: retail fascias, reception logo walls, bank-branch identity, and any sign that must read after dark
Print Branding · Type 02
Edge-lit Acrylic Sign Boards
LEDs fired into the edge of a clear acrylic panel, lighting etched or printed graphics with a clean halo effect.
- Slim profile: a minimal, frameless look suited to premium interiors and corporate lobbies
- Etch or print: laser-etched or printed graphics glow against a near-invisible panel
- Best for: reception desks, directory and floor signage, hospitality interiors
Print Branding · Type 03
Non-lit (Polished) Acrylic Boards
Solid or layered acrylic boards with a polished edge and applied graphics, used where illumination is not required.
- Premium finish: flame- or diamond-polished edges and colour-matched acrylic for a clean, high-end interior look
- Layered builds: stand-off layered acrylic for depth on nameplates, plaques, and brand walls
- Best for: interior wall signage, plaques, departmental boards
Print Branding · Type 04
3D Acrylic Letters & Logos
Built-up dimensional acrylic letters and logos, illuminated or plain, mounted flush or on standoffs.
- Mounting options: flush, standoff/spacer, or raceway-mounted to suit the wall and the look
- Illuminated variants: front-lit or halo-lit acrylic letters where a glowing identity is required
- Best for: reception brand walls, building fascias, conference-room and lobby identity
Print Branding · Type 05
Acrylic Glow Sign Boards
Acrylic-faced glow signs combining the durability of an acrylic front with backlit illumination, a popular shopfront and clinic format.
- Acrylic face advantage: sharper colour and a harder, more scratch-resistant face than flex glow signs
- Single or double-sided: including projecting double-sided boards for high-street visibility
- Best for: pharmacies, clinics, retail outlets, professional-service shopfronts
Print Branding · Type 06
Acrylic Nameplates & Door Signs
Slim acrylic nameplates and door/desk signs for professionals and offices.
- Personalised: printed or engraved names, designations, and logos with a clean polished edge
- Formats: wall, door, desk, and cabin nameplates in clear, frosted, or colour-matched acrylic
- Best for: advocates, doctors, consultants, cabins, and corporate desks
Print Branding · Type 07
Acrylic Reception & Logo Walls
Large-format backlit or dimensional acrylic logo installations for reception areas.
- Statement identity: backlit acrylic logo walls that anchor a reception or lobby brand environment
- Integration: co-ordinated with our in-house fit-out team when delivered as part of an office interior
- Best for: corporate offices, hotels, experience centres, BFSI head offices
Specification
Materials & standards we work to
The finish quality of an acrylic sign is decided by material grade, cutting precision, and the LED and power components behind it. We specify named, reliable components and document them at handover.
Acrylic
- Cast vs extruded acrylic: cast acrylic for laser-cut letters and premium edges; extruded for cost-sensitive flat faces, selected to suit the application
- Thickness and grade: 3 mm to 25 mm acrylic depending on face size, build-up, and structural need
- Finish: flame-polished and diamond-polished edges; clear, frosted, tinted, and opal/translucent grades for illumination
Illumination & electricals
- LED modules: named-brand LED modules (for example Cree, Osram, Nichia class) chosen for colour consistency and life
- Power supplies: reputed SMPS/drivers (for example Mean Well class) sized with headroom for reliability
- IP-rated assembly: weatherproofed wiring and gaskets for outdoor boards; safe, serviceable assembly for indoor units
Mounting & documentation
- Fixings: standoff, flush, and raceway mounting with appropriate anchors for the substrate
- Documentation: component and warranty pass-through details provided per engagement at handover
Ready when you are
Send the drawings, get a scoped quote.
Share the site, the scope and the date you need it working. We quote against a BOQ with every component itemised, and the first site visit carries no charge.
How We Deliver
From brief to handover.
A predictable, documented sequence from brief to handover, the same process whether it is a single reception wall or a multi-branch rollout.
Brief & site survey
We capture brand artwork, sizes, site conditions, and illumination needs; a site survey confirms wall substrate, power, and access.
Design & proofing
Scaled production artwork and material/illumination recommendations, signed off before fabrication.
In-house fabrication
Laser/CNC cutting, edge polishing, LED and power assembly, and quality checks at our Mumbai facility.
Installation
Our own installation team mounts and commissions the signage; outstation and multi-city jobs are co-ordinated centrally.
Handover & warranty
Functional check, as-installed record, and warranty documentation with component pass-throughs.
Why Buyers Choose IBS
Built in-house. Owned outright.
Acrylic signage is widely available: what differs is who controls the result. Because IBS fabricates and installs in-house, the things that go wrong with outsourced acrylic signs (uneven LED glow, chipped edges, colour drift, loose mounting) are ours to control and ours to stand behind.
01
In-house laser cutting & fabrication
We cut, polish, and assemble acrylic at our own Mumbai facility, no job-work middlemen, so edge quality, tolerances, and lead time are controlled by us.
02
One contract, single accountability
Design, manufacture, and pan-India installation under one contract, with GST-compliant, TDS-ready billing.
03
Same-roof fit-out integration
When acrylic signage is part of an office or retail interior, our in-house civil and fit-out team installs it as part of the build, one vendor for the wall and the sign on it.
04
Pan-India rollout capability
Consistent acrylic signage across multi-location retail and BFSI programmes, dispatched and installed nationally from our facility, with Gulf-country delivery available.
How does in-house acrylic fabrication compare with a job-work vendor?
Acrylic signage is frequently cut and polished by a job-work shop and handed on, which leaves nobody owning the edge finish or the fit. Here is how that compares with cutting it in-house.
| Typical Trading or Job-Work Vendor | IBS In-House Manufacturing | |
|---|---|---|
| Cutting and fabrication | Laser cutting sent out to a job-work shop, with edge quality varying per batch | Laser cutting and fabrication executed on IBS's own line |
| Material thickness | Thickness chosen to hit a price rather than to suit the face size | 3 mm to 25 mm acrylic specified by face size, build-up, and structural need |
| Accountability | Fabricator, installer, and supplier each hold part of the job | One contract, one accountable party from drawing to installation |
| Integration with an interior fit-out | Signage measured after the interior is complete and retrofitted | Produced under the same roof as IBS fit-out work and installed in the same project sequence |
Sectors We Serve
Where this work lands.
Acrylic signage spans almost every commercial environment. The brief changes by sector, a hospital needs legible, hygienic, wayfinding-grade signage; a retail brand needs colour-accurate fascias; a BFSI head office needs a controlled reception identity. We tailor material, illumination, and finish to each.
Corporate offices
Reception logo walls, 3D acrylic letters, cabin and directional signage, frequently delivered alongside our in-house office fit-outs.
See corporate office projects
Retail & showrooms
Backlit acrylic fascias, shopfront identity, and in-store brand signage with colour-accurate faces.
See retail projects
Healthcare
Hospital and clinic signage, department boards, and acrylic nameplates with clean, legible, easy-to-maintain finishes.
See healthcare projects
Banking & BFSI
Branch and head-office identity, backlit acrylic logos, and reception signage to a controlled brand standard.
See BFSI projects
Hospitality
Edge-lit and dimensional acrylic for hotel and restaurant interiors, reception, and wayfinding.
See hospitality projectsCommercials
How acrylic sign board engagements are structured
Every acrylic signage engagement is quoted against a clear scope, face sizes, material grades, illumination type, mounting, and installation locations, so there are no surprises between proof and handover.
What a quotation includes3 clauses
Design & fabrication
Production artwork, material and illumination specification, in-house laser cutting, edge finishing, and LED/electrical assembly of every unit.
Installation & commissioning
Delivery, mounting to the agreed substrate, electrical connection and commissioning of illuminated units, and site clean-up, co-ordinated centrally for multi-location work.
Warranty & documentation
Written warranty on workmanship with manufacturer pass-throughs on LED modules and power supplies, plus an as-installed record at handover.
| Discipline | Term |
|---|---|
| Acrylic faces & fabrication | workmanship warranty on fabrication and finish; replacement of defective faces within the warranty period |
| LED modules & power supplies | manufacturer warranty pass-through on named LED and SMPS/driver components |
No charge, no obligation
Request a Site Survey Site survey & feasibility
For installed signage, a site survey confirms wall substrate, available power, mounting access, and sightlines before fabrication. This avoids rework and ensures the finished sign mounts cleanly and illuminates evenly. Estimates are confirmed after survey and final artwork.
Share your brand artwork and site details for a transparent, line-item quotation.
Selected Work
Executed engagements.
Two illustrative engagement types from the IBS acrylic-signage portfolio. Project-level specifics and commercial figures are intentionally omitted. IBS does not publish project details without express client consent.
Corporate officeCorporate reception logo wall
Backlit acrylic logo wall and 3D acrylic lettering installed as part of an in-house office fit-out, single-vendor from wall to sign.
See related work
RetailMulti-outlet retail fascia programme
Colour-matched backlit acrylic fascias rolled out to a consistent brand specification across multiple outlets.
See related workQuestions
Everything procurement heads, project managers, and marketing teams ask before commissioning
Cost & Billing
What does an acrylic sign board cost in India?
Cost depends on size, acrylic grade, illumination type, quantity, mounting, and location. We issue a detailed, line-item quotation against your brief, contact us with sizes and artwork and we will provide a transparent quote. No fixed price is published because every board differs.
Timelines
How long does an acrylic sign board take to make?
Standard boards are typically completed within a short working-day window from artwork sign-off; large or multi-location rollouts are project-planned. A confirmed timeline is given at quotation.
Warranty & Service
Is there a warranty on acrylic sign boards?
Yes. We provide a workmanship warranty on fabrication and finish, plus manufacturer warranty pass-throughs on LED modules and power supplies, documented at handover.
Comparisons
What is the difference between an acrylic sign board and a flex glow sign?
An acrylic face is harder, sharper, and more colour-accurate than printed flex, and resists scratching and yellowing better. Flex is cheaper for very large faces; acrylic is preferred where finish and brand accuracy matter, such as reception walls, BFSI, and premium retail.
Rollouts & Sites
Do you handle multi-branch retail or BFSI rollouts?
Yes. We deliver consistent acrylic signage across multi-location retail and BFSI programmes with the same spec, brand colours, and lead time per site.
Technical
What is an acrylic sign board?
An acrylic sign board is signage made from cast or extruded acrylic sheet. It can be LED backlit, edge-lit, or non-lit, and made as a flat board, a built-up 3D letter set, a reception logo wall, or a nameplate. Acrylic is favoured for its clean optical finish and how evenly it carries light.
What is an acrylic LED sign board?
It is an acrylic-faced sign illuminated from behind by LED modules (backlit) or from the edge (edge-lit), producing an even glow. IBS manufactures both backlit and edge-lit acrylic LED sign boards in-house.
Do you make 3D acrylic letters and logos?
Yes. We laser-cut and build up dimensional acrylic letters and logos, illuminated or plain, with flush, standoff, or raceway mounting for reception walls, fascias, and brand environments.
Can acrylic sign boards be used outdoors?
Yes. With weatherproofed (IP-rated) electrical assembly, UV-stable acrylic grades, and appropriate sealing, acrylic boards perform outdoors. We specify outdoor-rated builds for shopfronts and fascias.
What thickness of acrylic do you use?
Typically 3 mm to 25 mm depending on face size, whether the piece is built up, and structural need. We recommend the right grade and thickness at the quotation stage.
Is the acrylic sign board manufactured in-house?
Yes. We cut, polish, and assemble acrylic at our own Mumbai facility, no outsourcing to third-party cutters, which is how we control edge quality, colour match, and LED spread.
Do you provide pan-India installation?
Yes. We have delivered signage across Mumbai, Pune, Delhi NCR, Bengaluru, Hyderabad, Chennai, Kolkata, and Tier 2/3 cities, with logistics and installation co-ordinated from our Mumbai base. We also serve Gulf countries.
Can you match our exact brand colour?
Yes. We colour-match acrylic and printed/vinyl faces to your brand specification, and proof the artwork before fabrication.
What illumination types are available?
Front/back-lit (even glowing face), edge-lit (clean halo), and non-lit (polished, no illumination). We advise the right type for the location and effect.
Do you make acrylic nameplates for offices and professionals?
Yes. We make wall, door, desk, and cabin nameplates in clear, frosted, or colour-matched acrylic, printed or engraved, for advocates, doctors, consultants, and corporate cabins.
Can you make a backlit acrylic logo wall for our reception?
Yes. Backlit acrylic logo walls are a core product; when part of an office interior, our in-house fit-out team installs them as part of the build.
What LED and power components do you use?
We specify named-brand LED modules and reputed power supplies/drivers, sized with headroom, and pass through manufacturer warranties at handover.
Do acrylic edges yellow or scratch over time?
Quality cast acrylic with proper polishing resists yellowing and scratching far better than low-grade sheet. We use appropriate grades and flame/diamond-polished edges for a lasting finish.
Can acrylic be combined with ACP or metal?
Yes. Acrylic faces are often combined with ACP backers or aluminium frames; we fabricate combined builds in-house, which keeps the finish and accountability under one vendor.
What do you need from us to start?
Your brand artwork (vector preferred), the sizes or site dimensions, the locations, and the illumination preference. A site survey for installed signage confirms substrate, power, and access.
Can you replace or refurbish an existing acrylic sign?
Yes. We re-face, re-LED, or refurbish existing acrylic signage, and can standardise older signs to a current brand specification across locations.
The Company
About Impulse Branding Solutions
Impulse Branding Solutions is a Mumbai-headquartered, vertically integrated commercial branding and fit-out execution company with over fifteen years of operating history. We deliver across two service lines under one roof: print branding and signage, including ACP cladding, LED sign boards, glow signs, channel letters, vehicle wraps and exhibition fabrication, and commercial interior fit-outs covering civil, MEP, false ceiling, joinery and turnkey contracting.
Our in-house manufacturing facility, in-house civil and engineering team and in-house furniture factory near Vasai East mean every project, from a single signage installation to a multi-Crore fit-out, runs through one team with single-point accountability. Approved vendor with Adani Airports, HSBC, Reliance Retail, HDFC ERGO, Godrej Finance, EPSON and Duravit. BCAS-cleared for airport work. Pan-India delivery at a single execution pace.
Read more about IBSTrack Record
Who you are buying from.
Delivery Team
A senior, in-house project team
Civil, MEP, and joinery leads supporting enterprise fit-out and branding projects across India.
“Every project runs under one accountable team, from site survey to final handover.”
Why IBS
- 15+ years executing branding and fit-out projects
- Pan-India delivery: single execution pace
- BCAS clearance for airport work
- In-house civil and engineering team: no subcontracted substructure
- In-house furniture factory near Vasai East: workstations, conference tables and case goods
- Approved vendor with Adani Airports, HSBC, Reliance Retail, EPSON, Duravit
Approved Vendor & Credentials
Company-level BCAS security clearance for airport projects; site access arranged per assignment
Approved vendor with
Adani Airports · HDFC ERGO · Reliance Retail · Godrej Finance · EPSON · Duravit · HSBC
Past clients
Accessorize · Adani Airports · Aditya Birla Retail · Duravit · EPSON · Godrej Finance · HDFC ERGO · HSBC · Reliance Retail · Sagility · Society Tea
Related Capabilities
Often specified together.
Acrylic signage frequently spans adjacent IBS service lines, particularly where it forms part of a facade refresh, a multi-discipline branding programme, or an office or retail fit-out.
Glow Sign Boards
Flex, acrylic, and ACP glow sign boards, front-lit, backlit, and edge-lit, for shopfronts, retail outlets, and corporate premises across India.
View DetailsLED Sign Boards
High-brightness LED sign boards for retail, corporate buildings, hospitals, malls, and outdoor installations. Energy-efficient, weatherproof, and built to last.
View DetailsACP Cladding & Architectural Signage
Aluminium composite panel cladding, building fascia, pylon signs, channel letters, and architectural signage systems for corporate and retail properties.
View DetailsOffice Fit-Outs
Dedicated office fit-out service for corporate clients, open-plan, hybrid, and traditional configurations. MEP-integrated, brand-ready, on-time delivery.
View DetailsFurther reading
References
Sources and standards
- India’s digital signage market was valued at USD 1,074.5 Million in 2025 and is forecast to reach USD 3,494.3 Million by 2034, a 14.00% CAGR. Component specification, rather than panel size, is what decides the cost of owning a lit sign over that period. IMARC Group, India Digital Signage Market, base year 2025
- Retail leasing across India’s top seven cities reached a record 8.9 million sq ft in 2025, and Zudio alone moved from roughly 341 to 765 outlets across 235 cities in FY25. Rollout volume at that rate turns brand consistency into a manufacturing problem. IBEF, Indian Retail Industry, updated February 2026
Ready to Start?
Acrylic signage that reads the way your brand should
From a single reception logo wall to a multi-branch rollout, manufactured in-house and installed across India.
Get a QuoteGet an acrylic signage quote
Tell us about your acrylic sign boards requirement.